| Automatic is on its way! 4r70 install plus pics! Update! | |
|
|
Author | Message |
---|
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Automatic is on its way! 4r70 install plus pics! Update! July 13th 2010, 10:50 am | |
| Just ordered up a 4r70w manual valve body, transbrake and 3500 stall triple disk lockup converter for the stang! I might have it in the car by the end of the summer to race. Or I might wait till I get the hoist in the new shop in January. The clutch is just not getting the job done right at this moment. Will see what she runs on this setup!
Last edited by Brett@K&KPerformance on December 14th 2010, 10:55 am; edited 1 time in total | |
|
| |
shawnss [MASTER TECH]
Age : 39 Join date : 2009-09-23 Posts : 1571 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! July 13th 2010, 11:17 am | |
| Nice sounds like it should do the trick. Imo I don't fill that a clutch car is good for a turbo. If your tryin to 1/4 mile it. To hard to build boost. Out of the hole. With that stall you should be able to build some good boost. With my little 2800 stall I can build like 9psi. | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! July 13th 2010, 11:28 am | |
| - shawnss wrote:
- Nice sounds like it should do the trick. Imo I don't fill that a clutch car is good for a turbo. If your tryin to 1/4 mile it. To hard to build boost. Out of the hole. With that stall you should be able to build some good boost. With my little 2800 stall I can build like 9psi.
Yep, a clutch is not the best for the dragstrip! It was always the plan to get an auto. I think I'm going to still try for the 10's with the clutch before I tear her down. | |
|
| |
QwkLX [STUDENT]
Age : 48 Join date : 2010-02-18 Posts : 149 Location : Great Falls
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! July 16th 2010, 2:19 am | |
| Hay Brett When I asked if your clutch was a adjustable I was talking about the pressure plate. If you use a adjustable pressure plate you can make the clutch act like a stall converter out of the hole. It will let the clutch slip and then the RPM of the motor will close it tighter the high you rev it. This is a must IMO for cars with a stick and alot of horsepower. The use of a diapham pressure plate is just useless with the kind of horsepower you're running. There is nothing wrong with running a stick it just takes the right set up. Some people think because they have a lot of horsepower you need a high pressure clutch this is the biggest mistake made. To get by buying a 500 dollar adjustable pressure plate I run a cheap clutch with a ok pressure plate and it slips the clutch out of the hole and tightens up at high RPM. Good Luck with the auto and are you going to Lewistown this year? I'm going to try for this month. | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 11:09 am | |
| Tranny is in here are some pics of the shifter installed! | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 11:14 am | |
| Here are some pics of the brackets welded | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 11:15 am | |
| Another pic. | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 11:17 am | |
| | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 11:18 am | |
| Top. | |
|
| |
shawnss [MASTER TECH]
Age : 39 Join date : 2009-09-23 Posts : 1571 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 3:36 pm | |
| nice job. was it a pain getting everything to work right? i take it the trans has a t-break? Or r you just going to run a big stall and foot break it? | |
|
| |
Brett@K&KPerformance [STUDENT]
Age : 42 Join date : 2010-02-17 Posts : 209 Location : Billings, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 4:17 pm | |
| Yep, it's got a trans brake. Tranny fit great we just had to fab up everything else which is a lot of work. | |
|
| |
Novaflash2002 [GARAGE NUT]
Age : 37 Join date : 2009-09-26 Posts : 823 Location : Great Falls, MT
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! December 14th 2010, 7:28 pm | |
| Nice. Peddle on the left for front brake line lock j/k. | |
|
| |
Sponsored content
| Subject: Re: Automatic is on its way! 4r70 install plus pics! Update! | |
| |
|
| |
| Automatic is on its way! 4r70 install plus pics! Update! | |
|