| so my winter project turned into a huge electrical mess | |
|
|
Author | Message |
---|
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: so my winter project turned into a huge electrical mess November 16th 2010, 10:36 pm | |
| For those who having been following my engine swap!!!!! It turned into a huge nightmare I pulled my engine from one car sticking it into another...but the injector wiring plug is different and my dizzy wires plug is diffrent.....so I'm swapping harness and I want to do a wire tuck in the engine bay now since I have no wires in there now and it looks so clean.....any one have the knowledge to Chase and count pins I want just the few engine wires to run into the engine bay as possible | |
|
| |
civiclove [WEEKEND WARRIOR]
Age : 34 Join date : 2010-07-02 Posts : 606 Location : ghetto wood mt
| Subject: Re: so my winter project turned into a huge electrical mess November 16th 2010, 11:42 pm | |
| have dennis do it u bastard there is a few ppl that could it maybe | |
|
| |
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 8:16 am | |
| | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 9:51 am | |
| My guess is you have a different OBD engine and harness. Your best bet is to get a harness to match the engine. If its just the distributor and injectors those are easy to rewire. But remember just because all the pins plug in doesn't mean they are in the correct order. A lot of cars use similar plugs for certain things but the wiring may not line up correctly. | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 3:46 pm | |
| Might be easier to run a stand-alone as you need next to nothing for sensors and it is really easy to hook up. | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 4:51 pm | |
| He'll still need injectors and a distributor, a stock ECU can run on the same small number of sensors so no reason to switch. But he'll still need the minimum and injectors are pretty important ha ha. | |
|
| |
f20bmt [WEEKEND WARRIOR]
Join date : 2009-09-26 Posts : 561 Location : Billings DUH
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 9:28 pm | |
| The car harness is obd0. The swap was in an EF so I think the issue might be a model difference in chassis harnesses or a shoddy wiring job on a previous owners part. Jess, get a multi meter and do it the hard way atleast you KNOW what the hell is going on. then if you need connectors that match call kelly at EJC and get some cannon plugs cause cannon plugs are baller on a wire tucked civic. clickclick... BAM! | |
|
| |
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 11:11 pm | |
| Ejc huh help kid I'm up for the look ill buy if u fly | |
|
| |
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: Re: so my winter project turned into a huge electrical mess November 17th 2010, 11:15 pm | |
| I got 6 wires on passenger side for dizzy and the injector wires on drivers side oh ya and the resistor box.....9 wires and chassis harness has 16 wires and a diffrent plug so I'm pulling harness out of the other hatch that the engine was previously running....so I guess that answers all the problem I did not wanna do this but I could not find info on repinnin the plugs thanks for all the support and help | |
|
| |
civiclove [WEEKEND WARRIOR]
Age : 34 Join date : 2010-07-02 Posts : 606 Location : ghetto wood mt
| Subject: Re: so my winter project turned into a huge electrical mess November 18th 2010, 8:26 pm | |
| or could be the problem the car is a turd dont say shit bout my car jesse heard it all already hhahaha | |
|
| |
f20bmt [WEEKEND WARRIOR]
Join date : 2009-09-26 Posts : 561 Location : Billings DUH
| Subject: Re: so my winter project turned into a huge electrical mess November 18th 2010, 8:53 pm | |
| | |
|
| |
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: Re: so my winter project turned into a huge electrical mess November 18th 2010, 11:26 pm | |
| Ya I got some info on tonight I need to see how many wires I'm gonna have come thru that spot | |
|
| |
92civic [ENTHUSIAST]
Age : 39 Join date : 2010-05-08 Posts : 464 Location : billings
| Subject: Re: so my winter project turned into a huge electrical mess November 18th 2010, 11:27 pm | |
| Before any one comments......all the wires right | |
|
| |
civiclove [WEEKEND WARRIOR]
Age : 34 Join date : 2010-07-02 Posts : 606 Location : ghetto wood mt
| Subject: Re: so my winter project turned into a huge electrical mess November 18th 2010, 11:30 pm | |
| | |
|
| |
Sponsored content
| Subject: Re: so my winter project turned into a huge electrical mess | |
| |
|
| |
| so my winter project turned into a huge electrical mess | |
|