| My last dyno! | |
|
+5SprockCapn DoodieHead heeb101 BlackedOut04 ts4l 9 posters |
Author | Message |
---|
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: My last dyno! September 28th 2009, 3:23 pm | |
| Here is my last dyno, this run was in 3rd gear so it was not a 1:1 ratio. The previous run made 461 hp in 4th gear but I was maxing out the speed on the dyno so we decided simply for tuning purposes to make the next run in 3rd. I have since made a few small changes in cam timing to promote quicker spool as I am now using Tomei 270 Solid cams that are laggier than I prefer in my search for power to 9K. I will try and get on the dyno again and see what the changes have done. I originally had the cam timing set to make more top end power. And as you can see the TS .78 housing is holding power back in the upper RPM's. A larger housing would make 500hp easy but since I am focused more on low rpm power to get my car setup for Road racing/scca. Engine: SR20det Turbo: Twin Scroll GT3076R Gas: 91 octane Booost: 21-22 psi.
Last edited by ts4l on September 28th 2009, 3:26 pm; edited 1 time in total | |
|
| |
BlackedOut04 [ENTHUSIAST]
Age : 33 Join date : 2009-09-25 Posts : 442 Location : No
| Subject: Re: My last dyno! September 28th 2009, 3:25 pm | |
| Those are a couple nice looking curves | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! September 28th 2009, 3:27 pm | |
| Thanks, they are not bad but still have room for improvement towards my ultimate goal. I used to have peak Tq at 3800 rpm's which I would like to get closer to however with these cams I will probably never get lower than 4400 rpm's. | |
|
| |
heeb101 [WEEKEND WARRIOR]
Age : 39 Join date : 2009-09-23 Posts : 535 Location : Chicago, IL
| Subject: Re: My last dyno! September 28th 2009, 3:51 pm | |
| Damn Smase!!! Your car is amazing. I need a ride before snow falls. | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! September 28th 2009, 3:58 pm | |
| May if it warms up, I took it for a drive this weekend but with the cooler weather I nearly died every time I got on it. I think I am going to pull the 245's off the back and put some 265's on with my new wing to help with traction. Anyone need some 245/40/18 Azenis with about 100 miles on them? | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: My last dyno! September 28th 2009, 4:56 pm | |
| I really wish my car would run like Jason's. He was the whole reason I went turbo in the first place, back in the day w/ the TS PAD!! Speaking of TS Pad, those days were amazing... Cars and women, lots of women!! I miss them so much!! Anyways, BOT, I need a dyno!! | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! September 28th 2009, 5:05 pm | |
| Those were the days, slow cars but tons of sexy women and lots of stories we can never tell anyone about> | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: My last dyno! September 28th 2009, 5:41 pm | |
| Fast women, fast cars, and fast food!!!!
Last edited by Admin on September 29th 2009, 9:26 pm; edited 1 time in total | |
|
| |
SprockCapn [STUDENT]
Age : 38 Join date : 2009-09-28 Posts : 123 Location : Billings, MT
| Subject: Re: My last dyno! September 29th 2009, 2:05 pm | |
| - Admin wrote:
- Fast women, fast cars and fast food!!!!
Amen to that!!! | |
|
| |
b1r - TS [WEEKEND WARRIOR]
Age : 41 Join date : 2009-09-28 Posts : 625 Location : Billings
| Subject: Re: My last dyno! September 29th 2009, 9:55 pm | |
| I will just say amen.... before any of the stories get out that may cause me a divorce! But dang those were good times | |
|
| |
Sprock_silvia [STUDENT]
Age : 42 Join date : 2009-09-30 Posts : 159 Location : Red Lodge Montana
| Subject: Re: My last dyno! October 1st 2009, 10:40 am | |
| If I could figure out how to post pictures I would post a pic of you running down the street next to the TA in a thong!!!! I would like to Thank Mike for all the Taco Bell!!! Nothing better than some Taco Bell after a good night of Drinking with Peeps. Sorry to steal your Thread Smase
(oo)SpRock(oo) | |
|
| |
ZipDriveX [MASTER TECH]
Age : 37 Join date : 2009-09-24 Posts : 1996 Location : Billings, MT
| Subject: Re: My last dyno! October 1st 2009, 10:56 am | |
| - Sprock_silvia wrote:
- If I could figure out how to post pictures....
Get a photobucket (or other image hosting service) and post away! | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! October 1st 2009, 11:01 am | |
| Perm anything that includes Bone in a thong is well worth stealing my thread. Not that any of my threads have any real value anyways. | |
|
| |
SprockCapn [STUDENT]
Age : 38 Join date : 2009-09-28 Posts : 123 Location : Billings, MT
| Subject: Re: My last dyno! October 4th 2009, 9:05 pm | |
| Ha. I'm gonna have to say I'm glad I wasn't there to see bone in a thong!!! oR at least I must have blocked that outta my memory :-) | |
|
| |
wile2k [ENTHUSIAST]
Age : 48 Join date : 2009-10-05 Posts : 322 Location : Billings, MT
| Subject: Re: My last dyno! October 5th 2009, 3:44 pm | |
| Enough talking about Bones and Thongs... lol...
Sweet dyno, that car is a beast!! | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: My last dyno! October 13th 2009, 9:07 pm | |
| I cannot wait till you get the 240 at maximum HP. I am going to guess around 505WHP. | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! October 14th 2009, 10:36 am | |
| It could hit that probably in current form, someday I'm gonna swap out to 850cc injectors and then see if I can get Martin to Tune it. The last car he tuned with the same setup I have but with smaller cams and a few less parts than I have made 601hp, but the tQ is what was really crazy. It was like 500 ft/lbs. All that out of a 2.0L is nuts. | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: My last dyno! October 14th 2009, 3:54 pm | |
| That is alot of juice out of a 2.0. | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! October 14th 2009, 3:56 pm | |
| I think i'll probably stick with the power I have for a while as its already too much for me to handle and when I SCCA or road race I will have to turn the boost down as low as I can go, and since I had to run the 14psi spring to be able to hit 26-30psi I will be stuck at 14 psi min. Should be around 360-380 whp which on a small coarse is going to be wild. | |
|
| |
DoodieHead [GOD LIKE]
Age : 43 Join date : 2009-09-20 Posts : 3074 Location : Shepherd, Montana
| Subject: Re: My last dyno! October 17th 2009, 8:28 am | |
| Yeah, I would say so sir. Anything over 300 is crazy on an SCCA course, as they are super tight. | |
|
| |
ts4l [GARAGE NUT]
Join date : 2009-09-25 Posts : 904 Location : Billings, MT
| Subject: Re: My last dyno! October 22nd 2009, 3:29 pm | |
| I finally got the files from Gary. This was one of the earlier runs. We ended up adding fuel and making a few changes. I like the scale of this better so you can really see the power curve. Sorry for the cheesy red marker but it was hard to see the small lines when I scanned it in and my Mac won't let me use Winpep to export the file. | |
|
| |
Sponsored content
| Subject: Re: My last dyno! | |
| |
|
| |
| My last dyno! | |
|