Montana Automotive Enthusiasts Club
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeGallerySearchLatest imagesRegisterLog in
Similar topics
Latest topics
» 2021 Track days in Lewistown and Helena
Looking for a good priced good work machine shop for engine bore Icon_minitimeby DoodieHead November 20th 2020, 8:54 am

» FS Apple MacBook Pro MD318D/A 39,1cm 2,2GHz, 4GB RAM, 500GB HDD, AMD HD 6750M $650
Looking for a good priced good work machine shop for engine bore Icon_minitimeby datomalli21 July 14th 2015, 12:17 am

» FS HTC One M9 32GB Gold $480/Apple iPhone 6 4G 64GB $400
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Dert231 July 9th 2015, 12:13 am

» FS HTC One M9 32GB Gold $480/Apple iPhone 6 4G 64GB $400
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Dert231 July 9th 2015, 12:12 am

» FS HTC One M9 M9u 4G LTE 32GB $500/Apple iPhone 6 16GB $390
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Gtristk200 July 7th 2015, 1:40 pm

» FS HTC One M9 Plus 32gb 4g Lte Unlocked Gunmetal $540
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Gtrikertiks010 June 28th 2015, 10:47 pm

» WTS iPhone 6 $350 128GB S6 Edge $350 128GB Original Unlocked
Looking for a good priced good work machine shop for engine bore Icon_minitimeby malachilexaa June 8th 2015, 1:13 am

» All-Wheel Dyno landing Mid-July
Looking for a good priced good work machine shop for engine bore Icon_minitimeby ts4l June 7th 2015, 6:32 pm

» WTS iPhone 6 $350 128GB S6 Edge $350 128GB Original Unlocked
Looking for a good priced good work machine shop for engine bore Icon_minitimeby marquisroy June 7th 2015, 1:48 am

» FS Apple iPhone 6 Plus 64Gb Factory Unlocked $470
Looking for a good priced good work machine shop for engine bore Icon_minitimeby izegbadimore330 May 26th 2015, 2:53 am

» GoPro Hero 4 and Many accessories.
Looking for a good priced good work machine shop for engine bore Icon_minitimeby SprockCapn May 21st 2015, 11:41 pm

» FS Apple iPhone 6 Plus 128Gb Factory Unlocked $600
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Frtermaklill30 May 20th 2015, 4:20 am

» FS BLACKBERRY PASSPORT RGY181LW 32GB SQW100-1 UNLOCKED 4G $330
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Tmertlserti May 12th 2015, 10:18 pm

» FS Pioneer DDJ-SX2 - 4-Channel DJ Controller with Serato $600
Looking for a good priced good work machine shop for engine bore Icon_minitimeby Dterrstermill3 April 30th 2015, 1:33 am

» 1995 talon seats, guages, subs,focus suspension
Looking for a good priced good work machine shop for engine bore Icon_minitimeby talontsi February 15th 2015, 2:14 pm

March 2024
MonTueWedThuFriSatSun
    123
45678910
11121314151617
18192021222324
25262728293031
CalendarCalendar

 

 Looking for a good priced good work machine shop for engine bore

Go down 
+5
White_Trash
rocket_z350
BlueSteel
tunermt
InertialZenki95
9 posters
AuthorMessage
InertialZenki95
[NEWBIE]
[NEWBIE]
InertialZenki95


Age : 32
Join date : 2012-03-27
Posts : 37
Location : Billings MT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeMarch 31st 2012, 1:19 pm

Anyone know of a machine shop that has good history and good prices with working on 4 bangers?
I know theres many out there just looking for the right one seeing since this is a car forum I leave some room for disputing to find the right shop to go with so CHAT ON PLEASE!!!!!
Back to top Go down
tunermt
[TRAINEE]
[TRAINEE]
tunermt


Join date : 2010-11-14
Posts : 93
Location : Missoula, Phoenix, Seoul South Korea, Bangkok

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 2nd 2012, 9:44 pm

Ah if only you were closer to Missoula, what engine? whats the build? I see you have a s14, i may actually have a block I could machine for you or a full long block ready to rock Smile depending on what your after of course.

Back to top Go down
http://brewedmotors.com
BlueSteel
[GARAGE NUT]
[GARAGE NUT]
BlueSteel


Age : 30
Join date : 2009-11-26
Posts : 929
Location : Billings

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 2nd 2012, 10:18 pm

I've had good luck with Engines Etc
Back to top Go down
rocket_z350
[ENTHUSIAST]
[ENTHUSIAST]
rocket_z350


Join date : 2010-03-28
Posts : 414
Location : Billings

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 2nd 2012, 10:26 pm

Ive never had problems with hartung engine rebuilders (8th and like 2 blocks north of broadwater)
Back to top Go down
InertialZenki95
[NEWBIE]
[NEWBIE]
InertialZenki95


Age : 32
Join date : 2012-03-27
Posts : 37
Location : Billings MT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 3rd 2012, 10:33 am

tunermt wrote:
Ah if only you were closer to Missoula, what engine? whats the build? I see you have a s14, i may actually have a block I could machine for you or a full long block ready to rock Smile depending on what your after of course.




KA24DE I have a bone stock one in my car and a guy I know has a KA block that I'm going to build up and just wanted to know peoples opinons on shops so I can check them out . So far its Hartung, Engines Ect and one off Grand in some guys backyard shop that I hear does good work but Idk if thats Hartung or something else .
Back to top Go down
White_Trash
[NEWBIE]
[NEWBIE]



Join date : 2010-04-03
Posts : 29
Location : Billings

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 3rd 2012, 9:35 pm

Avoid Engines Etc. Local guy had a BBC block cleaned and checked...the block came back with a fuel pump push rod stuck in the block and a crack in the lifter valley. Apparently they cant do either.

Back to top Go down
tunermt
[TRAINEE]
[TRAINEE]
tunermt


Join date : 2010-11-14
Posts : 93
Location : Missoula, Phoenix, Seoul South Korea, Bangkok

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 3rd 2012, 10:47 pm

Quote :
KA24DE I have a bone stock one in my car and a guy I know has a KA block that I'm going to build up and just wanted to know peoples opinons on shops so I can check them out . So far its Hartung, Engines Ect and one off Grand in some guys backyard shop that I hear does good work but Idk if thats Hartung or something else .

ka24de built for boost or high compression NA build? If you don't end up finding someone your comfortable working with in Billings we can supply anything from a machined block to a fully assembled long block Wink
Back to top Go down
http://brewedmotors.com
nate jackson
[WEEKEND WARRIOR]
[WEEKEND WARRIOR]
nate jackson


Join date : 2010-04-13
Posts : 548
Location : BMT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 4th 2012, 9:51 pm

Stout bottom end for boost Wink Jake's using my old block and head, but he will need some machine work for sho. That being said Brewedmotorsports should have all the part necessary for you build!
Back to top Go down
tunermt
[TRAINEE]
[TRAINEE]
tunermt


Join date : 2010-11-14
Posts : 93
Location : Missoula, Phoenix, Seoul South Korea, Bangkok

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 4th 2012, 11:56 pm

Pistons, rods, bearings and ARP all ready to go for the KA24 Wink would be very happy to help a fellow MT KA-T build.

Back to top Go down
http://brewedmotors.com
Dr.Auto
[GARAGE NUT]
[GARAGE NUT]
Dr.Auto


Age : 45
Join date : 2009-09-24
Posts : 977
Location : Lockwood, MT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 5th 2012, 10:30 am

InertialZenki95 wrote:
Anyone know of a machine shop that has good history and good prices with working on 4 bangers?
I know theres many out there just looking for the right one seeing since this is a car forum I leave some room for disputing to find the right shop to go with so CHAT ON PLEASE!!!!!

I also have never had any issues with Hartung machine.... but they're specialty is not little 4cyl's either.... if you use them just make sure you know exactly what you want and tell them and they will do exactly what you tell them.

i have recently tried Cal down at Magic city engine rebuilders with no issues either. 406-855-8807. he used to work for the B2B machine shop when it was going with Don Witcomb... and I think he was part of the Web Machine adventure but not sure. He's got a small shop but I've been treated well. He does good cyl head work... He also did all the bottom end work on my B20Vtec S/C build... I just know for a fact he cant install sleeves in the Honda blocks.... IDK if he does balance work or not but I use Shawn Maddox (ex mobile serv auto/machine) in shepherd for all my balance work. Few friends have used Cal on their engines too... everything checks out on the build that he's done so far so you might give him a try.
Back to top Go down
InertialZenki95
[NEWBIE]
[NEWBIE]
InertialZenki95


Age : 32
Join date : 2012-03-27
Posts : 37
Location : Billings MT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 5th 2012, 10:41 am

I''m diggin all of the support guys Its still along ways off but gives me some good starting points cheers
Back to top Go down
HIVOLTJ
[TRAINEE]
[TRAINEE]
HIVOLTJ


Join date : 2010-07-01
Posts : 93
Location : Billings, MT

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 9th 2012, 3:22 pm

Whatever you do, stay the fuck away from Eric's Cylinder Service

Dude is a hack, doesn't know what the fuck he is doing, and a mental midget.

I had great service from Engines Etc. Don't care for Jerry the owner much, but Gary is a great guy and machinist. Had one small issue with a crank they supplied and ground for me having too much endplay, they got another one and ground it for me no problems. Jerry did the valve job on my heads and took my word that the guides were good (I checked them before dropping off the heads) and didn't try to treat me like an idiot that doesn't know what the fuck I'm doing.
Back to top Go down
DoodieHead
[GOD LIKE]
[GOD LIKE]
DoodieHead


Age : 43
Join date : 2009-09-20
Posts : 3074
Location : Shepherd, Montana

Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitimeApril 9th 2012, 5:38 pm

I have had experience with both Hartung (my father-in-law) and Engines Etc. Engines Etc took .040 off my pistons 3 years ago and they looked great. As far as speed goes, they are a bit slow. It took them a week just to get my block washed and ready for re-assembly.

Norm at Hartung is a fantastic guy and he is much quicker for turnaround. Had him dunk my heads overnight before the last engine install I did and they turned out fantastic.
Back to top Go down
http://www.maecforum.com
Sponsored content





Looking for a good priced good work machine shop for engine bore Empty
PostSubject: Re: Looking for a good priced good work machine shop for engine bore   Looking for a good priced good work machine shop for engine bore Icon_minitime

Back to top Go down
 
Looking for a good priced good work machine shop for engine bore
Back to top 
Page 1 of 1
 Similar topics
-
» good machine shop
» Engine looking real good here
» Engine Mod HELP!

Permissions in this forum:You cannot reply to topics in this forum
Montana Automotive Enthusiasts Club :: 'The Coffee Shoppe' :: Open Discussion-
Jump to: